3-IN-1 VENTILATOR — INTEGRATED TURBINE

bellavista® 1000 select

The ZOLL bellavista 1000 select ventilator delivers invasive ventilation, non-invasive ventilation (NIV) and high-flow oxygen therapy (HFOT) on a single platform — for pediatric and adult patients, in the ICU, operating room, emergency and intra-hospital transport. Internal turbine (no external compressor), 13.3″ touchscreen and an interface configurable by specialty.

Model: ZOLL bellavista 1000 select

ZOLL bellavista 1000 select ventilator
3-în-1NIV · invasive · HFOT
13,3″colour touchscreen
>120L/min NIV leak compensation
3h+internal battery life

THE 3-IN-1 CONCEPT

A single ventilator covers the whole clinical workflow

Instead of three separate machines (invasive ICU, ward NIV, post-extubation HFOT), the bellavista 1000 select covers all three on the same platform. It reduces capital expenditure, simplifies staff training and provides a consistent experience for clinicians — from the operating room to inter-hospital transfer.

  • Full invasive ventilation — VCV, PCV, PSV, SIMV, AVM, target volume
  • NIV with >120 L/min leak compensation and MaskFit for mask fitting
  • Integrated HFOT — high-flow oxygen therapy with no extra equipment
  • Internal turbine — no compressed medical air, runs on O₂ alone
  • Configurable interface — each specialty sets up its own screen

VIDEO

bellavista — ZOLL overview

SMART TECHNOLOGIES

Algorithms that reduce manual settings

The bellavista platform's "auto" stack works breath by breath to optimise patient comfort, synchronisation with spontaneous effort and lung protection.

SYNCHRONISATION

auto.sync · auto.rise · auto.leak

The algorithms detect the optimal expiratory threshold, adjust the pressure rise time breath by breath and automatically compensate for NIV leaks — up to over 120 L/min.

  • auto.sync — expiratory threshold adapted to the patient's effort
  • auto.rise — rise time adjusted automatically (no overshoot)
  • auto.leak — NIV leak compensation >120 L/min
  • Fewer false alarms, less asynchrony

ADAPTIVE MODE

AVM & TargetVent

AVM (Adaptive Ventilation Mode) automatically calculates the optimal combination of tidal volume and rate based on the patient's weight. TargetVent guarantees the target minute volume in pressure modes.

  • AVM — set the weight + target minute volume, the rest is automatic
  • TargetVent — guaranteed tidal volume in PSV/PCV
  • Continuous transition from control to spontaneous
  • Speeds up weaning without repeated manual settings

INTEGRATED HFOT

High-flow oxygen — no separate equipment

HFOT is available as a native therapy on the bellavista 1000 select. It allows a fast transition from NIV to HFOT (or vice versa) without changing the device — useful in acute hypoxemic respiratory failure and post-extubation.

  • Compatible with standard nasal cannulas
  • Fast NIV → HFOT → IMV transition on the same device
  • Reduces the need for re-intubation in post-extubation patients
  • Indicated in hypoxemic respiratory failure

CONFIGURABLE INTERFACE

AnimatedLung · VentSummary · Settings Assist

The interface can be customised by specialty. Clear graphical visualisations of lung mechanics, a weaning dashboard and a preview of settings before applying them reduce clinical errors and clinician workload.

  • AnimatedLung — real-time compliance/resistance visualisation
  • VentSummary — dashboard with weaning parameters
  • Settings Assist — preview of time/cycle/I:E before applying
  • Customisable layout by specialty (ICU, neuro, cardio)

TECHNICAL SPECIFICATIONS

bellavista 1000 select operating parameters

Display13.3″ colour touchscreen
Patient categoriesPediatric and adult
Tidal volume40 – 2500 mL
Inspiratory pressure (IPAP)0 – 100 mbar
PEEP / EPAP0 – 50 mbar
Psupport0 – 80 mbar
Respiratory rate0 – 100 bpm
Peak inspiratory flow0 – 260 L/min
FiO₂21 – 100 %
NIV leak compensation> 120 L/min
Inspiratory triggerFlow 0.1 – 20 L/min · Pressure 0.1 – 15 mbar
Air sourceInternal turbine (no external compressor)
O₂ source0 – 7 bar
Internal batteryMinimum 3 hours
Power supply100 – 240 VAC, 50/60 Hz
CircuitsSingle-limb and dual-limb (NIV compatible)
NebuliserIntegrated pneumatic (optional)
ConnectivityRS232, Ethernet, USB, VGA, Nurse Call, HL7
ComplianceCE marked; built in Switzerland (imtmedical)

VENTILATION MODES

Full range — invasive, non-invasive, HFOT

  • Pressure-controlled

    CPAP · PCV · P-A/C · PC-SIMV · PSV · beLevel · APRV · S · S/T · T

  • Volume-controlled

    VCV · V-A/C · VC-SIMV · PLV (Pressure Limited Ventilation)

  • TargetVent (hybrid)

    PSVtargetvent · P-A/Ctargetvent · PC-SIMVtargetvent

  • Adaptive — AVM

    Adaptive Ventilation Mode — automatically calculates optimal Vt and RR

  • Non-invasive (NIV)

    CPAP · PSV · P-A/C · PC-SIMV · beLevel · APRV + target variants — with MaskFit for mask fitting

  • HFOT

    High-flow oxygen therapy — flow up to 60 L/min, FiO₂ 21–100%

CLINICAL INDICATIONS

Where it makes the difference

  • ATI

    Long-term invasive ventilation with lung-protective protocols and automatic recruitment manoeuvres.

  • NIV / MaskFit

    Acute COPD exacerbation, pulmonary edema, prolonged weaning. Leak compensation >120 L/min + visual mask guidance.

  • HFOT post-extubare

    High-flow oxygen as an alternative to re-intubation. Direct transition on the same device.

  • Intra-hospital transport

    Internal turbine (no compressed air) + battery ≥3h. Direct switch from transport to the ICU bed.

  • Weaning & AVM

    Automatic weaning supported by AVM + AnimatedLung + VentSummary for fast bedside decisions.

  • Pediatrics

    The modes are validated for pediatric patients — tidal volume from 40 mL.

WHY THE BELLAVISTA 1000 SELECT

The most versatile version in the bellavista line

The "select" model offers the optimal balance of functionality and cost: it includes the full suite of modes and advanced synchronisation tools, but with a 13.3″ touchscreen and without the extreme neonatal options of the 1000e — ideal for hospitals wanting a universal ventilator for adult/pediatric ICU, without paying for the larger screen of the 1000e flagship.

  • Built in Switzerland — imtmedical, distributed globally by ZOLL
  • CE marked — distributed in over 90 countries
  • Configurable interface — each ward sets up its own screen
  • TargetVent — guaranteed tidal volume in pressure modes
  • Invasive → NIV → HFOT transition on the same device

COMPARISON WITH bellavista 1000e

Which to choose: 1000 select or 1000e?

bellavista 1000 selectbellavista 1000e
Touchscreen13,3″17,3″ full-HD
PatientsPediatric + adultNeonatal + pediatric + adult
Minimum tidal volume40 mL2 mL (with Neonatal Suite)
Auto synchronisationauto.sync · auto.rise · auto.leakSame + extended advanced stack
HFOTIncludedIncluded as a native mode
Cloud RKPOptional (HL7)Natively integrated
FDA 510(k)Cleared (Nov. 2019)
Weight12,7 kg14,8 kg
Recommended forGeneral ICU, NIV, transport — optimal price/functionality ratioReference centres, neonatology, cloud-analytics workflows

Interested in the bellavista 1000 select?

Hellimed provides technical consulting, clinical demonstrations and custom configurations for the bellavista 1000 select — for adult ICU, pediatrics, NIV and intra-hospital transport. We help you compare it with the bellavista 1000e and choose the right model for your hospital.

Request a quote for the bellavista 1000 select